View Presentation Print Brochure

Our Best Tool for Drivetrain Prognostics Research
SpectraQuest’s Drivetrain Prognostics Simulator (DPS) has been specifically designed to simulate industrial drivetrains for diagnostics and prognostics research. The DPS drivetrain consists of a two-stage planetary test gearbox and a two-stage parallel shaft test gearbox with rolling or sleeve bearings. These two test gearboxes can be arranged to apply the highest torque to either, a torque which is large enough to induce wear and damage in the gears. The two-stage parallel shaft gearbox can be configured with a gear ratio from 1 to 6. All elements of the DPS have been designed to maximize the number of drivetrain configurations to investigate gearbox dynamics and acoustic behavior, health monitoring, and vibration based diagnostic and prognostics techniques. It is robust enough to handle heady loads and spacious enough for easy gear placement, setup, and installation of monitoring devices. The two test gearboxes are attached to two parallel shaft load gearboxes and drive.

Gear and Bearing Fault Diagnostics and Prognostics
The effect faults like surface wear, crack tooth, chipped tooth and missing tooth can be demonstrated and induced on either spur gears or helical gears. Rolling element bearing faults like inner race, outer race, and ball damage can also be incorporated. Adjustable clearance to study backlash is possible: increasing the amount of backlash is without major consequence, and reducing backlash can result in binding and/or excessive operating temperatures. Drivetrain misalignment can also be introduced intentionally in the DPS. Any of these faults can be added to the drivetrain one at a time, or simultaneously to study fault interactions. Both torsional and radial loadings can be applied to study damage signature or propagation in gears and/or bearings: the torsional load is applied via a 10 HP variable frequency AC drive with a programmable, user-defined speed profiles; and the radial load is applied to a shaft in the parallel gearbox. With the programmable load drive, load fluctuations can be applied to simulate real life loading conditions.

Features

One 2-stage planetary test gearbox 27:1 ratio.

One 2-stage oil-lubricated parallel shaft test gearbox up to 6.25 ratio.

Planetary and parallel shaft gearboxes re-locatable to induce damage in either test gearboxes.

Torsional and radial variable speed loading.

Gears can slide along the parallel shafts to alter system stiffness and make room for additional devices.

Parallel shaft gearbox adaptable to spur or helical gears and to rolling element bearings or sleeve bearings.

Intentionally damaged or worn gearing can be fitted to study the effects on vibration signature.

Alterable backlash by replacing bearing mounting hubs to provide the desired clearance.

Modular design makes the introduction of faulted bearing and/or faulted gears an easy task.

Load drivetrain consist of one 3-stage and one 2-stage oil-lubricated parallel shaft gearboxes providing up 98:1 ratio.

Multiple mounting locations provided for installation of various transducers.

Develop diagnosis and prognosis techniques and advanced

The DPS is Heavy-Duty and Easily Configurable The DPS design enables changing gearbox and bearing components quickly and easily. The parallel gearbox is adaptable to install either rolling element bearings or oil-impregnated sleeve bearings with either spur or helical gears. The modular design makes the introduction of faulted bearing and/or faulted gears an easy task. Transducers and DAQ The drivetrain is designed to accommodate different types of sensors easily. Accelerometers can be installed on the gearboxes and on the bearing housing to measure the vibrations in all three directions. A torque meter enables precise load measurement. The input and output shafts can be fitted with encoder or tachometer to measure the transmission error or for time synchronize averaging. Other transducers can also be installed per customers’ request. Data acquisition hardware and software are also available from Spectra Quest and ready to do time domain and frequency domain signal analysis.

Electrical
Motor	3 Phase, 10 HP motor
Load	3 Phase, 10 HP motor
Drive	10 HP variable frequency, common bus AC drive system with multi-featured front panel programmable controller
RPM range	0 to 3600 rpm variable speed
Voltage	230 VAC, Three phase, 60/50 Hz
Mechanical
Shaft Diameter	1” diameter; Turned, Ground, & Polished (TGP) steel
Test Planetary Gearbox	2-stage, 27:1 gear ratio planetary gear with 4 planet stage1 and 3 planet stage 2
Test Parallel Gearbox	2-stage, 2.5 maximum ratio per stage (6.25 max), spur or helical gears
Test Parallel Shaft Gearbox Bearing	Deep groove ball bearing or oil-impregnated bronze sleeve bearing
Test Bearing Loader	3000lb capacity with force transducer
Load Gearboxes	98:1 total maximum ratio One 2-stage, 2.5 maximum ratio per stage (6.25 max), spur gears One 3-stage, 2.5 maximum ratio per stage (15.6 max), spur gears Deep groove ball bearing
Torque meter	Up to 100N.m with built-in 360 pulse encoder
Output shaft encoder	360 pulse per turn encoder
Alignment	Jack bolts on gearboxes and motors for horizontal alignment and standard shims for vertical alignment
Oil Distribution	0.9 gpm capacity distribution and cooling oil system driven by 1/3 HP motor
Foundation	5/8” steel plates on 4”x6” steel beams
Physical
Weight	Approximately 2200lb (1000kg)
Dimensions	L=112” (285cm), W=22” (56cm), H=22” (56cm) test rig L=30” (76cm), W=16” (41cm), H=26” (66cm) oil distribution D=17” (43cm), W=36” (91cm), H=60” (152cm) motor drive

Basic Drivetrain Prognostics Simulator (DPS) Includes:

• Two 3 Phase 15 HP heavy duty induction motors, one to drive and one to load test gearboxes
• Two 15 HP variable frequency drives, common DC bus drive system with multi-featured front panel programmable controller
• Test Gearboxes:
  • One 2-stage planetary gear with four planet stage 1 and three planet stage 2
  • One in-line parallel shaft gearbox configurable as two stage reduction/increaser,
• Load Gearboxes:
  • Two in-line parallel shaft gearbox with much larger load capacity than test gearboxes; one gearbox with two stage increaser, one gearbox with three stage speed increaser
• Ten spur gears between to two gearboxes giving sevral mesh frequencies
• Fourteen rolling element bearings
• Precision machined bearing housings at both ends of the gearbox with mountings for direct measurements of bearing vibration
• Gearbox bearing loader (4000lb capacity) with force transducer mounted on parallel shaft test gearbox
• Jack bolts on gearboxes and motors for horizontal alignment and standard shims for vertical alignment
• Input shaft torquemeter (up to 100N.m) with built-in 360 pulse encoder
• Output shaft of the test gearbox with 360 pulse per turn encoder
• Gearbox oil level gauge
• 0.9gpm capacity distribution and cooling oil lubrication system driven by 1/3HP motor
• Vibration isolators mounts and base stiffener
• Comprehensive operations manual

The DPS provides a basic setup for performing drivetrain diagnosis and prognosis experiments. SpectraQuest also offers pre-damaged gears for in-depth study and parallel gearbox conversion kits to helical gear and sleeve bearings.

	Parallel Gearbox Bearing Fault Kit (G-BFK-1)
	Learn waveform and spectra of classic bearing defects. Learn about signal processing issues such as averaging techniques, leakage, and spectral resolution on determining bearing faults. Perform experiments with increasing severity of defects. Determine why an ultra-high resolution spectrum is needed to diagnose a bearing fault when fault frequencies are located close to multiples rotational speed. Learn how a large signal can mask adjoining low amplitude signal due to spectra leakage. The kit consists of one inner race defect, one outer race defect, one with ball defect, and one combination of defects.
	Planetary Gearbox Bearing Fault Kit (G-BFK-P)
	Study bearing faults in planetary gearbox The kit consists of two different levels of inner race fault and two different levels of needle fault.
	Defective spur gears (G-SDG)
	Study the effect of damaged tooth in gearboxes. Apply phase demodulation signal analysis to detect gear damage. Investigate backlash between mating gears. The kit consists of one missing tooth gear, one chipped tooth gear, one root
	Helical gears set (G-HG)
	Study the helical gears parallel shaft gearbox. Compare vibration signature between spur and helical gears. The kit consists of four helical gears to replace standard spur gears in gearbox
	Defective helical gears (G-HDG)
	Study the effect of damaged helical gears. Apply phase demodulation signal analysis to detect gear damage. The kit consists of one gear with chipped tooth, one gear with missing tooth and one gear with surface defect Requires G-HG
	Eccentric spur gear (G-ESG)
	Study the effects of eccentric spur gear. Measure the vibration signature of eccentric gears. The kit consists of one eccentric spur gear.
	Parallel gearbox oil-impregnated sleeve bearing (G-SBH)
	Compare vibration signature between rolling element and sleeve bearings. Investigate waveform and spectral recognition of worn or loose fitting bearings. The kit consists of six 1” oil-impregnated bronze sleeve bearings.
	PC Motor and Load Control Kit (G-PCMLK)
	Operate DDS and magnetic brake from remote location. Pre-program speed acceleration, deceleration, and length of run to meet exact requirements. The kit consists of PC software, one interface module to motor drive and cables. Pre-program load profiles of run to meet exact requirements. The kit consists of PC software, one interface module to magnetic brake and cables.

High Value Combination Packages
The DPS is available in high value combination packages focusing on bearing and gear studies.

Package No. 1: Basic DPS + Kits for in-depth studies of bearing and gear diagnostics concepts

Option kit		PKG 1
Parallel gearbox bearing fault kit	G-BFK-1	x
Planetary gearbox bearing fault kit	G-BFK-P	x
Parallel gearbox oil-impregnated sleeve bearing	G-SBH	x
Defective spur gears	G-SDG	x
Eccentric spur gear	G-ESG	x
Helical gears set	G-HG	x
Defective helical gears	G-HDG	x
Defective planatary gears	G-PDG	x
PC motor and load control kit	G-PCMLK	x