Model 602D01 Product Type: Accelerometer, Vibration Sensor Low profile, industrial, ceramic shear ICP® accel., 100 mV/g, 0.4 to 8000 Hz, side exit, 2-pin connector   View  photo
PERFORMANCE ENGLISH SI Sensitivity  (± 10 %) 100 mV/g 10.2 mV/(m/s²) [2] Measurement Range ± 50 g ± 490 m/s² Frequency Range  (± 3 dB) 30 to 480,000 cpm 0.5 to 8000 Hz [3] Resonant Frequency 1500 kcpm 25 kHz [1] Broadband Resolution  (1 to 10,000 Hz) 350 µg 3434 µm/s² [1] Non-Linearity ± 1 % ± 1 % [4] Transverse Sensitivity ≤ 7 % ≤ 7 % ENVIRONMENTAL     Overload Limit  (Shock) 5000 g pk 49,050 m/s² pk Temperature Range -65 to +250 °F -54 to +121 °C Enclosure Rating IP68 IP68 ELECTRICAL     Settling Time  (within 1% of bias) ≤ 2.0 sec ≤ 2.0 sec Discharge Time Constant ≥ 0.3 sec ≥ 0.3 sec Excitation Voltage 18 to 28 VDC 18 to 28 VDC Constant Current Excitation 2 to 20 mA 2 to 20 mA Output Impedance <150 ohm <150 ohm Output Bias Voltage 8 to 12 VDC 8 to 12 VDC Spectral Noise  (10 Hz) 8.0 µg/√Hz 78.5 (µm/s²)/√Hz [1] Spectral Noise  (100 Hz) 5 µg/√Hz 49.1 (µm/s²)/√Hz [1] Spectral Noise  (1 kHz) 4 µg/√Hz 39.2 (µm/s²)/√Hz [1] Electrical Isolation  (Case) >108 ohm >108 ohm PHYSICAL     Size (Length x Width x Height) 1.65 in x 0.74 in x 0.845 in 41.9 mm x 18.8 mm x 21.5 mm Weight 2.61 oz 74.0 gm Mounting Thread 1/4-28 Male No Metric Equivalent [5] Mounting Torque 2 to 5 ft-lb 2.7 to 6.8 N-m Sensing Element Ceramic Ceramic Sensing Geometry Shear Shear Housing Material Stainless Steel Stainless Steel Sealing Welded Hermetic Welded Hermetic Electrical Connector 2-Pin MIL-C-5015 2-Pin MIL-C-5015 Electrical Connection Position Side Side SUPPLIED ACCESSORIES: Model 081A97 Thru bolt 1/4-28 (1) OPTIONAL VERSIONS M - Metric Mount Supplied Accessory : Model M081A97 Captive mounting bolt, M6 x 1 x 25.4 mm long, hex head (1) TO - Temperature Output Temperature Output Range +36 to +250 °F +2 to +121 °C Temperature Scale Factor 5.56 mV/°F + 32 +10 mV/°C Electrical Connector 3-Pin 3-Pin Electrical Connections (Pin A) Acceleration Output Acceleration Output Electrical Connections (Pin B) Ground Ground Electrical Connections (Pin C) Temperature Output Temperature Output All specifications are at room temperature unless otherwise specified. NOTES: [1] Typical. [2] Conversion Factor 1g = 9.81 m/s². [3] The high frequency tolerance is accurate within ±10% of the specified frequency. [4] Zero-based, least-squares, straight line method. [5] 1/4-28 has no equivalent in S.I. units. [6] See PCB Declaration of Conformance PS023 for details. [6]
Top