Model 606B11 Product Type: Accelerometer, Vibration Sensor Ring-style, industrial, ceramic shear ICP® accel, 100 mV/g, 0.5 to 10k Hz, side exit, 10-ft integral cable   View  photo
PERFORMANCE ENGLISH SI Sensitivity  (± 20 %) 100 mV/g 10.2 mV/(m/s²) [2] Measurement Range ± 50 g ± 490 m/s² Frequency Range  (± 3 dB) 30 to 600,000 cpm 0.5 to 10,000 Hz [3] Resonant Frequency 1500 kcpm 25 kHz [1] Broadband Resolution  (1 to 10,000 Hz) 350 µg 3434 µm/s² [1] Non-Linearity ± 1 % ± 1 % [4] Transverse Sensitivity ≤ 7 % ≤ 7 % ENVIRONMENTAL     Overload Limit  (Shock) 5000 g pk 49,050 m/s² pk Temperature Range -65 to +250 °F -54 to +121 °C Enclosure Rating IP68 IP68 ELECTRICAL     Settling Time  (within 1% of bias) ≤ 2.0 sec ≤ 2.0 sec Discharge Time Constant ≥ 0.3 sec ≥ 0.3 sec Excitation Voltage 18 to 28 VDC 18 to 28 VDC Constant Current Excitation 2 to 20 mA 2 to 20 mA Output Impedance <150 ohm <150 ohm Output Bias Voltage 8 to 12 VDC 8 to 12 VDC Spectral Noise  (10 Hz) 8 µg/√Hz 78.5 (µm/s²)/√Hz [1] Spectral Noise  (100 Hz) 5 µg/√Hz 49.1 (µm/s²)/√Hz [1] Spectral Noise  (1 kHz) 4 µg/√Hz 39.2 (µm/s²)/√Hz [1] Electrical Isolation  (Case) >108 ohm >108 ohm PHYSICAL     Size (Diameter x Height) 1.38 in x 1.00 in 35.1 mm x 25.4 mm Weight  (without cable) 4.4 oz 124 gm Mounting Through Hole Through Hole Mounting Thread 1/4-28 Male Not Applicable [5] Mounting Torque 2 to 5 ft-lb 2.7 to 6.8 N-m Sensing Element Ceramic Ceramic Sensing Geometry Shear Shear Housing Material Stainless Steel Stainless Steel Sealing Welded Hermetic Welded Hermetic Electrical Connector Molded Integral Cable Molded Integral Cable Electrical Connection Position Side Side Cable Length 10 ft 3.0 m Cable Type Polyurethane Polyurethane [6] SUPPLIED ACCESSORIES: Model 081A68 Captive mounting bolt 1/4-28 x .90" (1) OPTIONAL VERSIONS M - Metric Mount Supplied Accessory : Model M081A68 Captive mounting bolt M6 x 1 (1) replaces Model 081A68 All specifications are at room temperature unless otherwise specified. NOTES: [1] Typical. [2] Conversion Factor 1g = 9.81 m/s². [3] The high frequency tolerance is accurate within ±10% of the specified frequency. [4] Zero-based, least-squares, straight line method. [5] 1/4-28 has no equivalent in S.I. units. [6] Twisted shielded pair. [7] See PCB Declaration of Conformance PS023 for details. [7]
Top