Specifications
622A01

• Add Cables
• Add Termination Box
• Add Mounting Hardware
• Add Switch Box

*General purpose, industrial ceramic shear ICP® accel, 100 mV/g, 0.2 to 10k Hz, top exit, 2-pin conn.
* Sensitivity: (±5%) 100 mV/g (10.2 mV/(m/s²))
*Frequency Range: (±5%) 35 to 240000 cpm (0.58 to 4000 Hz)
*Measurement Range: ±50 g (±490 m/s²)
*Electrical Connector: 2-Pin MIL-C-5015
*Electrical Connection Pos: Top

• Add BNC Connector
• Add Termination Box
• Add Mounting Hardware
• Add Switch Box

*General purpose, industrial, ceramic shear ICP® accel, 100 mV/g, 0.2 to 10k Hz, top exit, 10-ft integral cable
* Sensitivity: (±5%) 100 mV/g (10.2 mV/(m/s²))
*Frequency Range: (±5%) 35 to 240000 cpm (0.58 to 4000 Hz)
*Measurement Range: ±50 g (±490 m/s²)

• Add BNC Connector
• Add Termination Box
• Add Mounting Hardware
• Add Switch Box

*General purpose, industrial, ceramic shear ICP® accel, 100 mV/g, 0.2 to 10k Hz, top exit, 10-ft integral armor cable
* Sensitivity: (±5%) 100 mV/g (10.2 mV/(m/s²))
*Frequency Range: (±5%) 35 to 240000 cpm (0.58 to 4000 Hz)
*Measurement Range: ±50 g (±490 m/s²)
*Electrical Connector: Integral Armored Cable
*Electrical Connection Pos: Top

• Add Cables
• Add Termination Box
• Add Mounting Hardware
• Add Switch Box

*Ring-style, industrial, ceramic shear ICP® accel, 100 mV/g, 0.2 to 10.5k Hz, side exit, 2-pin conn.
* Sensitivity: (±5%) 100 mV/g (10.2 mV/(m/s²))
*Frequency Range: (±5%) 30 to 390000 cpm (0.5 to 6500 Hz)
*Measurement Range: ±50 g (±490 m/s²)
*Mounting: Through Hole
*Electrical Connector: 2-Pin MIL-C-5015
*Electrical Connection Pos: Side

Specifications
625B11

• Add BNC Connector
• Add Termination Box
• Add Mounting Hardware
• Add Switch Box

*Ring-style, industrial, ceramic shear ICP® accel, 100 mV/g, 0.2 to 10.5k Hz, side exit, 10-ft integral cable
* Sensitivity: (±5%) 100 mV/g (10.2 mV/(m/s²))
*Frequency Range: (±5%) 30 to 390000 cpm (0.5 to 6500 Hz)
*Measurement Range: ±50 g (±490 m/s²)
*Mounting: Through Hole

Specifications
625B61

• Add BNC Connector
• Add Termination Box
• Add Mounting Hardware
• Add Switch Box

*Ring-style, industrial, ceramic shear ICP® accel, 100 mV/g, 0.2 to 10.5k Hz, side exit, 10-ft integral armor cable
* Sensitivity: (±5%) 100 mV/g (10.2 mV/(m/s²))
*Frequency Range: (±5%) 30 to 390000 cpm (0.5 to 6500 Hz)
*Measurement Range: ±50 g (±490 m/s²)
*Mounting: Through Hole
*Electrical Connector: Integral Armored Cable
*Electrical Connection Pos: Side

Specifications
606B01

• Add Cables
• Add Termination Box
• Add Mounting Hardware
• Add Switch Box

*Ring-style, industrial, ceramic shear ICP® accel, 100 mV/g, 0.5 to 10k Hz, side exit, 2-pin conn.
* Sensitivity: (±20%) 100 mV/g (10.2 mV/(m/s²))
*Measurement Range: ±50 g (±490 m/s²)
*Mounting: Through Hole
*Electrical Connector: 2-Pin MIL-C-5015
*Electrical Connection Pos: Side

Specifications
606B11

• Add BNC Connector
• Add Termination Box
• Add Mounting Hardware
• Add Switch Box

*Ring-style, industrial, ceramic shear ICP® accel, 100 mV/g, 0.5 to 10k Hz, side exit, 10-ft integral cable
*Sensitivity: (±20%) 100 mV/g (10.2 mV/(m/s²))
*Measurement Range: ±50 g (±490 m/s²)
*Mounting: Through Hole
*Electrical Connector: Molded Integral Cable
*Electrical Connection Pos: Side

Specifications
606B61

• Add BNC Connector
• Add Termination Box
• Add Mounting Hardware
• Add Switch Box

*Ring-style, industrial, ceramic shear ICP® accel, 100 mV/g, 0.5 to 10k Hz, side exit, 10-ft integral armor cable
*Sensitivity: (±20%) 100 mV/g (10.2 mV/(m/s²))
*Measurement Range: ±50 g (±490 m/s²)
*Mounting: Through Hole
*Electrical Connector: Integral Armored Cable
*Electrical Connection Pos: Side

• Low-Cost, Industrial ICP Accelerometers for permanent Installation
• Precision Industrial ICP Accelerometers for Route-Based measurements
• Velocity Sensors
• High frequency Industrial ICP Accelerometers
• Low frequency Industrial ICP Accelerometers
• Multi-Axis Industrial ICP Accelerometers
• High Temperature Industrial  Accelerometers
• 4-20 mA Vibration Sensing Transmitters