Buy Balancing and Bearing Fault Simulator Online

You are here - HOME

Online Store

Order free evaluation copy of our software

Software

Simulators/Trainers

Accelerometers

Machinery Protection

Impact Hammer

Handheld Shaker

Stroboscopes

Tachometers

Proximity Probes

All transactions are secured by FirstData

Online Store Policy

Balancing and Bearing Fault Simulator (BBS)


	Balancing/Bearing Fault Simulator Includes: - 1/3 HP Variable frequency AC drive with multi-featured front panel programmable controller, 110 or 220 VAC 1 phase supply 3 Phase 1/3 HP motor, pre-wired self-aligning mounting system for easy installation/removal Split bracket bearing housings with features for span reconfiguration Vibration isolators mounts and base stiffener Two balance rotors with two rows of holes Built-in Tachometer with LCD display and analog output One 5/8" TGP (Turn, ground and polish) straight steel shaft Impact resistant clear safety cover with safety interlock Balance weight kit Allen wrench set Comprehensive operations manual
	$4080
	Quantity: Crate&Handling: $125 Shipping: $225 for contiguous 48 US state


Balancing Training Book The Balancing Training Book teaches the basics of machine balancing.	Eccentric Rotor The kit consists of one aluminum rotor with an asymmetrically located center and one clamp collar.	Cocked Rotor The kit consists of a cocked aluminum rotor (0.5 degree off-axis) and one clamp collar
$85	$335	$360
Quantity:	Quantity:	Quantity:


Centrally bent rotor shaft for balance studies The kit consists of one 3/4” shaft centrally bent ~0.020”	5/8" shaft bearing fault kit The kit consists of one inner race defect, one outer race defect, one with ball defect, and one combination of defects.	5/8" shaft bearing loader The kit consists of one 5/8” bore loader weighting 11lb (5kg) and two collars.
$200	$490	$270
Quantity:	Quantity:	Quantity:


1" shaft bearing study kit The kit consists of two split bearing housings, two 1” inside diameter bearings, two 6” aluminum rotors with 36 threaded holes, one 1” diameter shaft, and one coupling.	1" bearing fault kit The kit consists of one inner race defect, one outer race defect, one with ball defect, and one combination of defects.	1" shaft bearing loader The kit consists of one 1” bore loader weighting 11lb (5kg) and two collars.
$910	$515	$285
Quantity:	Quantity:	Quantity:


	Cocked bearing housing The kit consists of one cocked bearing housing		5/8" shaft sleeve bearing kit The kit consists of two customized grease-lubricated, babbitt lined sleeve bearings, two bearing pedestals, and various thickness plastic shims.
	$420		$565
	Quantity:		Quantity:

BBS Package 1: Kits for Balancing Studies Includes: -Basic BBS -Balancing training book -Eccentric rotor -Cocked rotor -Centrally bent shaft for balance studies	BBS Package 2: Kits for Bearing Defect Studies Includes: -Basic BBS -5/8" shaft bearing fault kit -5/8" shaft bearing loader -1" shaft study kit -1" shaft bearing fault kit -1" shaft bearing loader -Cocked Bearing housing -5/8" shaft sleeve bearing kit	BBS Package 3: Kits for Balancing and Bearing Studies Includes: -Basic BBS -Balancing training book -Eccentric rotor -Cocked rotor -Centrally bent shaft for balance studies -5/8" shaft bearing fault kit -5/8" shaft bearing loader -1" shaft study kit -1" shaft bearing fault kit -1" shaft bearing loader -Cocked Bearing housing -5/8" shaft sleeve bearing kit
$4745	$7060	$7890
Quantity: Crate&Handling: $125 Shipping: $225 for contiguous 48 US states	Quantity: Crate&Handling: $125 Shipping: $225 for contiguous 48 US states	Quantity: Crate&Handling: $125 Shipping: $225 for contiguous 48 US states

If you face any difficulty in placing the order online, please fill out this online order form and send it to us by fax (804-261-3303) or e-mail (info@spectraquest.com)