|
Specifications
Bearing Fault Detector 682A05
-Bearing Fault Detector, DIN rail mount vibration transmitter (for use w/ICP® sensor), dual 4 to 20 mA outputs for overall and peak vibration
-Provides early warning of bearing and gear faults, detects impacting associated with spalling, cracking, and lubrication problems, outputs dual 4-20 mA signals for overall vibration and peak acceleration, provides excitation for ICP® accelerometers.
|
|
Specifications
Smart Vibration Switch 686B01
-USB programmable electronic vibration switch with 2-pin MIL-C-5015 connector
-Low cost verstile and fully USB Programable electronic vibration switch that replaces unreliable mechanical vibration switches. It is also a significantly lower cost alternative for many electronic vibration switch applications
-Alarm Threshold: (±10%) 0.25 to 5 in/sec pk (4.5 to 90 mm/s rms)
-Frequency Range: (±3dB) 180 to 60 kcpm (3 to 1000 Hz)
-Operational Delay: (±1sec) 1 to 60 sec
-Relay: (Type) SPST, Form A or B MOSFET
-Power Required: 24 to 240 V DC/AC 50/60 Hz
Add
cable Add
accessories |
|
Specifications
Electronic Vibration Switch 685Bxxxx
-Electronic vibration switch, internal ICP, dual Form C relays,
standard enclosure with single 1/2"" NPT opening
Various options:
-Vibration sensor: built-in or remote
-Measurement Range: 0 to 1.5in/sec, 0 to 5g, 0 to 15 mil, 0 to 50 mil
-Power required: 85 to 245VAC, 24VDC
-Relay Type: Triac, electromechanical
-Enclosure type: NEMA 4X, reset button, signal output connector, CSA explosion proof
-Enclosure connection: 2 ports, 2 ports NPT conduit, 1 port, 1 port NPT conduit, 2 ports 1/2 NPT
|
Online
Store 
Software
